Buddha Flash (All Zorro Amiga)

Hurry! Last Remaining Stock

Buddha Flash Phoenix Edition is an IDE controller for all Zorro based Amigas: A1500, A2000, A2500, A3000(T) and A4000(T). It will also work with any A1200T equipped with a Zorro busboard.

Features
1 x 3.5" IDE Connector (40-pin)
1 x 2.5" IDE Connector (44-pin)
2 x LED Connectors, 1 for each IDE port
1 x Clockport (22-pin) for use with items such as the Silversurfer or Subway USB
32K FlashROM
FlashROM write-protect jumper
Autoboot from Kickstart V1.3 or better
Compatible with nearly every IDE/Atapi devices: harddisks, Atapi CD-Roms (any speed), Atapi CD-changer, Syquest removable media, LS120 (120 MB floppy, so-called "A-drive"), IDE ZIP drives, Atapi CD-Writer (with MakeCD)
Small product design. Dimensions: 130mm x 50mm x 2mm (5.12 inches x 1.97 inches x 0.08 inches)


Package Contents
1x Buddha Flash Phoenix Edition Zorro Card
1x Amiga Installation floppy disk containing drivers and IDEFIX package
1x 40-way IDE cable

The drivers are written by Elaborate Bytes. You get the whole IDE-package from Elaborate Bytes: Cache CD Filesystem, Harddisk autopark, CD-Changer drivers and the CD-32 emulator (AGA chipset only). Harddisks are formatted using the HDToolbox of your workbench.

Harddisks larger than 4 GBytes have been a problem for Amigas for a very long time. The Buddha also solves this problem: It supports the "TD64" commands, so large harddisks are no longer a problem.

NOTE: THIS IS THE LAST LIMITED QUANTITY OF STOCK REMAINING, HAND ASSEMBLED AND QUALITY TESTED BY AMIGAKIT TECHNICAL SERVICES. WARRANTY PROVIDED ONLY BY AMIGAKIT AND NOT ORIGINAL MANUFACTURER, INDIVIDUAL COMPUTERS.